Rhinestone Guy, Inc.

To Order, Call Us At (888) 594-7999  or  (714) 480-1000

rhinestoneguy@yahoo.com

TOOLS and Helpful Equipment

Kandi Crystal Crafter: Made for the hobby crafter, comes with 6SS, 10SS, 16SS, 20SS, 30SS, and 34SS tips...plug and play!  Good for light wieght stoning, but in our opinion, too light wieght to successfully mount 34SS stones...takes too long! But a good buy for the money.     $ 16.95

Kandi Kane Professional:  This is a great all around tool for hot fixing...comes with 6SS, 10SS, 16SS, 20SS, 30SS, and 34SS rhinestone tips, and a flat tip for nail heads. Handle is ergonomically designed for comfort, fast to heat.  A very good tool for those who do a lot of heat setting.    $ 24.95

Kandi  Glitz n' Go:  For those on the run, lose a stone at a contest! No problem...just have a few extra stones with you, battery operated (3 AA cells), takes about 8 seconds to mount a 20SS stone! Place the stone, push the Glitz n' Go tip against the stone, pull the trigger and count!  The stone is mounted! No mess, no fuss, no worries!   Great tool for contestants.                         $ 11.95

Kandi Hot Fixer:  Here is the tool for the serious minded who set 16SS, 20SS, 30SS, 34SS, and 40SS stones!   This unit is HOT!  Will set a 20SS stone in less than 8 seconds, and gets hot enough to set 34SS and 40SS stones quickly! NOT for stones smaller than 16SS ! Comes with 16SS, 20SS, 30SS, and 34SS tips. Takes about 1 minute to warm up!                          $ 34.95

New:  12SS tip for either Kandi Kane:  $2.25 each   Please note, Kandi Kanes do NOT have a 12SS tip included!           

Extra tips or replacement tips for Kandi Kane:  $2.25 each

NEW ITEM: HEAT FIX STENCILS !  lay on fabric, place stones in holes with Kandi Kane....when all holes are filled, remove stencil and pattern will be in rhinestones...easy, perfect for the "design impared." Most stencils use 20SS Heat Fix rhinestones...ask at time of purchase.     Patterns are reusable.

Lines  H 3101   7.95 ea	Hexagon Pattern H3102  7.95 each	Cowboy Boot   6.95 each	Hearts..multi sizes  H3107   7.95 each
Crown  H3112    5.95 each	Hybiscus H3113  5.95 ea	Running Flower   H3114  6.95 each	Fleur de Lis  H3115  7.95 ea
Paws  H3118  5.95	Small Butterfly  H3120  5.95 ea	Large Butterfly  H3121  8.95 each
Cross   H3129    6.95 each	Heart Neckline  H3128    7.95 each	Ribbon...H3111  5.95 each
Multi Stars  H3116   8.95 each	Neckline  H3123  7.95 ea	Summer Beach  H3123  8.95 each

The 'BeDazzler' hobbyist Rhinestone and Nail Head Setter

    Perfect for personal stone and nail head setting.... Low cost, easy to use.  Will set rhinestones using Tiffany mounts sizes 20ss and 34SS, Nail Heads 20SS. 30SS, 40SS, and some rim sets.   Please note: the Bedazzler tool is NOT SUITABLE for leather or multi layers of heavy fabric. This is a light weight unit suitable for hobby use only. PLEASE NOTE: Bedazzlers now come in a plain cardboard box, include instructions and designs. They are no longer packed in a 4 color box. 

            In Stock now    .................................................................$11.95   (Close out)

   Brisk Set ...

There is no doubt about it, this is the best tool on the market (when it is on the market) that you can find to set Tiffany mounted flat-backs and point backs in the business when commercial equipment exceeds your budget. It is very easy to use, highly machined quality and lasts for years. It has lots of attachments available that allow you to set nail heads and rim sets.   Sets SS20-SS40 with tiffany mounts as it is supplied        .....................................................................................................................       $19.95    (Close Out)

Attachments for the Brisk Set:  10.75 each Each listed below is a separate adapter   (Close out)

• Tight Set adapter:  allows setting down to size 12SS flat backs with tiffany, point backs to size 19SS

• Rim-Set/Nail Head  SS 20

• Rim-Set/Nail Head  SS 30

• Rim-Set/Nail Head  SS 34

• Rim-Set/Nail Head  SS 40

• Rim-Set/Nail Head  SS 42

• Rim-Set/Nail Head  SS48  (size 60 nail head)

• Nail Head  Size 70

• Nail Head Size 80

• Whole Pearl 5mm

Glue: Beacon, GemTac, 4 oz applicator 'bottle' .................................... $5.95 per tube   Glue: Beacon, GemTac, Micro Applicator tip 2 oz 'bottle' ...................  $5.95 per tube Glue: Flip Flop Glue, Tube            ........................................................  $5.95 per tube     Applicator Sticks:  Package of 2, great for applying rhinestones with glue .... $2.20/package

Rhinestone Guy Professional Setter

Sets 16SS, 20SS, 30SS, and 34SS and rim settings, Sets 16SS, 20SS, 30SS, 34SS Nail Heads

 RG Pro Setter (8 lbs w/tools) heavy duty cast machine attaches nail heads sizes 16,20-30-34 right side up. Works on rim sets size 4mm/16SS, 5mm/20SS, 6.4mm/30SS and 7mm/34SS stones RIGHT SIDE UP!!!. Changes dies very quickly by hand!

 Directions for nail heads: Insert top die, insert bottom die using tool place prongs of nail heads on pad and insert in top die. Adjust screw if necessary not to crush nail head. Also works on squares and pyramids! 20 die: 20 flat square and 703 pyramid 30 die: 30 flat square . 700 pyramid n.b. All dies-can work on regular, long and extra long leg nail heads.  This is a very heavy duty tool, commercial quality.

Sets Nail Heads and Rim SEts right-side UP!  Will set ONLY the sizes shown above.  Other dies are available by speicial order for eyelets and other size nail heads/rim sets. 

This is Phil's personal choice for use in rim setting where a foot press is not needed. 

Allow about $15.00 shipping                                                          $ 105.00 including all dies above.   (Close out)

  Commercial Duty Foot Press:   Floor standing foot press for mounting just about anything to fabric and/or leather.  Cast metal construction, uses specific die(s) for each item being mounted.   Dies ordered separately.  Foot operated, frees both hands for positioning.   This is the unit used in the garment industry (the industry standard for mounting presses) for mounting rhinestone, rim mounts, nail heads, and pearls.   Perfect for Commercial and Higher Level Cottage Industries. If you are working in Leather, this is the machine!         $   530.00 FOB Los Angeles

This unit comes in a flat box, must be assembled (very easy). We supply a sheet showing where all the parts go. You will need a screw driver and a wrench to assemble. Unit weighs 140 pounds, is shipped UPS GROUND....allow about 70.00 to ship from Los Angels (determined by actual freight charges), and takes about 10 days to reach you. Takes about 1 1/2  hours to assemble on site.  It occupies about 20" X 20" floor space, is stool height to operate.

                                 Dies for Commercial Foot Press:   Available for all sizes of Tiffany Mounts, Rim Sets, Nailheads (including shapes), leather punches (for holes in leather) and rivets.

                                                                Typical dies for tiffany and rim sets         $ 93.00 each

                                                                Other dies upon request  (shaped dies run from 105.00)

             Commercial Duty Hand Press:  Similar to Foot Press, has hand lever and is table mounted (no floor stand, your table).  Uses same dies as Commercial Duty Foot Press....Order Dies Separately.  (has advantage of weight and size, but requires one hand to operate.)  Since this unit uses same dies as foot press, you do not loose your die investment if your press needs grow into foot press!   Excellent choice for the beginning and intermediate cottage industry or the costumer.  Our choice for entry into the Leather Decoration world. Like all hand setters, this unit leaves only one hand free to hold or guide fabrics or leather while applying settings. If you feel you need both hands to hold fabric, etc., during application, this unit is NOT for you. Instead, purchase the foot press.

                                                                                                $ 220.00  FOB Los Angeles

NOTE:  Of the two units, the foot press and the hand press, the foot press has a good resale value in that it is used in most commercial application settings. The hand press is not popular in this arena, and therefore will be harder to resell. IF you can afford the foot press, purchase this unit, for it is much more useful in all applications. 

  Tee Square Alignment Tool

Makes centering and squaring the sets of Rhinestone Transfers a breeze...no more guess work. Sliding cross bar for repeated perfect placement 

      Tee Square (NEW PRODUCT)   ..............................$ 42.95  plus 9.25 shipping.   Makes transfers fool-proof! 

Heat Presses

Rhinestone Guy offers a complete line of Heat Presses for all types of heat application.  Our experience has taught us that George Knight heat presses are the best value for the money.

  JET PRESS 12

        Temperature and timer controls of bot JP 12 and JP14

Ideal press for home application and light cottage industry.   Features a SWING away 9X12" platen with lifetime warranty on heating element.   The Jet Press 12 has all steel welded frame, can set transfers of any type on materials up to 1" thick (plaques, etc.)  Perfect for rhinestone transfers.    650 watts (any household plug will do.  Weighs just 30 pounds for easy placement on table, etc.  

This unit has been greatly improved and now includes:

Digital Countdown Timer, Adjustable Temperture Setting (to over 400 degrees), Temperature Thermometer reading, Adjustable Height (to over 1").  This unit is now perfect for the hobby crowd and very small cottage industry. 

                                                            JP 12..............  279.00   FOB Massachusetts  (allow about 30.00 UPS Ground...the farther away from Massachusetts, the higher the shipping.

  JP 12  swinging open.   

    Jet Press 14

The Jet Press 14 features a 12" X 14" Platen, with fully adjustable temperature control,  Swing Away that allows hand setting of rhinestones without danger of hitting platen, silicon pad pressing surface, heating indicator light. 

This unit is satisfactory for all rhinestone or stud transfers on garments (not for plaques), can be used in any household plug (1200 watts) and weighs 59 pounds.  Perfect for cottage industry for rhinestone, stud, ink transfers.   This new design meets our criteria for a fine Heat Press. It uses the same platen stand as the DK 20 series! This unit allows setting of transfers on any substrate thickness that falls within its range. This is one fine unit for the money.  It is a full feature, heavy-built unit that will stand up for many years, even under commercial use. This is our choice for most heat-press use. Unless you are setting extremely large transfers, there is no need to spend more money for a heat press. 

                                                                Jet Press 14  ......  499.00   FOB  Massachusetts  (Allow about 50.00 for shipping...West coast will be slightly higher.)

   Commercial DK Series

DK 16: 14X16"  Clamshell press all new as of August, 2004

• Fully digital Temperature control

• Automatic Digital Timer

• Digital Pressure/height guage

• 70 programmable presets

• Solid Steel welded Framework, Super portable, only 83 pounds

• Interchangeable tables

• SuperCoil Microwinding heater technology (lifetime on heat platen)

• Automatic lift/gas spring action

• Opens up to 110 degrees for full access to table

• Temp readout accurate to 2 degrees

• User selectable end-of-cycle alarms

• Records number of pressing cycles done

• Teflon-coated 3/4" thick heat platen

• 3 year warranty on controls

• 1 year warranty on entire press

• 1500 Watts - 13 Amps, 83 lbs  (available in 220v-7Amp model) 

• This is the heat press you purchase when money doesn't count, but highest quality does.  This is the heat press we use  in our facility !

• 32" L X 17" W X 16" H                                                                             $ 875.00  FOB  Massachusetts

  DK 20 

All features of the DK 16,  with 16" X 20"  Platen,    1800 Watts, 103 lbs    1050.00  FOB Massachusetts

  Commercial Swing Press

DK 20S  All features of the commercial DK presses, with Swing Away action, accommodates up to 1" thick materials,   16X20 Platen, 1800 Watts, 185 lbs       ......1350.00   FOB Massachusetts

  Commercial Cap Press

All features of the DK Clamshell series, 350 Watts, 4X7 platen, supplied with standard 4X7 bottom form, (Low-Crown/Kids forms available)     48 lbs.    ..............................575.00   FOB Massachusetts

We use this Cap Press in our facility!

Twin Cap Press

High production twin loading version of the DK7, features two 4 X7" bottom forms with single swing platen press.                         ........................................................775.00   FOB Massachusetts

  Digital Combo Unit (shirt unit)

Features super Swing Away press with interchangeable platens and tables.

Digital Combo   12 X 14"   DC 14,  1300 W, 120 lbs, with shirt head  ....... 995.00

Digital Combo   14 X 16"  DC 16,   1500 W, 120 lbs, with shirt head  .......1195.00

   Mug Attachment for DC unit ....300.00

  Plate attachment for DC unit  ... 225.00

  Cap attachment for DC Unit  ..  275.00

  Cube Attachment for DC Unit  ...  200.00

  Shuttle Presses and Large format self-registering presses available from  $6500.00  Call

Back To Site Index

To Order, call (888) 594-7999

Rhinestone Guy . Com, Inc

Kandi Kane, Kandi Kane Professional, Crystal Crafter, Crystal Krafter, Krystal Krafter, Glitz n' Go, Kandi, Kane, Foot press, Commercial foot press, kick press, hand press, Brisk setter, Bedazzler, bedazzeler, brisk set, brisk set attachments, brisksetter attachments, Rim setter, Rim set press, Kandi Kane tips,